Jerseyville, IL, Fire-N-the-hole Broadheads has introduced the SLANG BLADE 1x4 mechanical broadhead. The only mechanical broadhead on the market that can be used with traditional compound bows and crossbows alike.

Fire-N-The-Hole Broadheads Slang Blade 1x4 Mechanical Broadhead:

The Slang Blade 1x4 mechanical broadhead is a different design from other mechanical broadheads on the market with 3 goals in mind: 1) A firing mechanism that guarantees to open every time and 2) the largest cutting radius than any other broadhead. 3) field point accuracy.

Size: The 1x4, 4-inch cut is attained by removing the ferrule out that the traditional broadheads have, and replacing it with the weight of the cutting blades. This gives the blades four times more material than traditional blades of other broadheads. Each blade weighs 34.5 grains, which means that 70% of the weight of the broadhead is in the blades. This turns blades into small knives, which are tough enough to cut through skin, fur, flesh, bone, vital organs, etc. At 50-thousandths thick and 200-thousandths wide, this makes the 4-inch mechanical an exceptionally durable broadhead that gets the job done.

Cut: The blades are sharpened and beveled in one direction, like the blade of a lawnmower or scissors. Each blade is sharpened to the point making the broadhead cut on contact. This design gives the 1x4 the sleekest profile amongst all mechanical broadheads resulting in unmatched broadhead accuracy. The 1x4 spins through the air closed {7/8” in flight} and continues spinning through the animal at 4 inches in width for unmatched penetration for such a large broadhead.

Opening Mechanism: The most common complaint of the mechanical broadhead is that it does not open. We have designed a broadhead that opens using angles, friction, and levers that upon striking game it must open. The cut-on-contact blades engage the game and stabs in like knives, friction and angle move the blades out to the sides as it slices through and enters the vitals cavity. This mechanism fully opens within the first inch of engaging the animal and will be open at 4 inches while passing through the animal. This broadhead saves enough kinetic energy to consistently obtain pass through shots on most game.

Fire-N-The-Hole Broadheads is currently looking for manufacturers representatives throughout the United States. For territory consideration contact: Robert Anthon at banthonbamm@gmail.com or 716-717-5768

For information on other Fire-N-The-Hole Bowhunting products visit www.firenthehole.com